4081 Miniature Super Cardioid Microphone, Black

За Сцена и ТеатриDPA
4081 Miniature Super Cardioid Microphone, Black
    • Ultra-low profile field recording
    • All-round instrument miking
    • Wireless compatible
    • High isolation on stage

    The DPA 4081 Supercardioid Miniature Microphone is a high quality directional condenser microphone primarily intended to use for ultra-low profile, discreet recordings in the field or as all-round microphone for instrument miking.

    Each 4081 is a complete, integrated system combining microphone, windscreen, shock mount and cable management system.

    The IMK4081 Instrument Microphone Kit offers the possibility to mount a supercardioid condenser microphone close to or at an instrument with either the enclosed clip or magnet. The 4081 combines high isolation on stage with natural sound imaging.

    The SMK4081 Stereo Microphone Kit combines two selected DPA 4081 directional microphones providing a cost-effective and flexible stereo recording solution. To create an optimized stereo pair, the microphones are selected to have identical sensitivity within ±1 dB at 1 kHz.

    There are two easily interchangeable mounting options included; clip-on and magnet mounts.

    Directional characteristics: Supercardioid
    Principle of operation: Pressure gradient
    Cartridge type: Pre-polarized condenser element with vertical diaphragm
    Frequency range: 20 Hz to 20 kHz
    Frequency range, ± 2 dB, 20 cm (7.9 in) distance: 80 Hz to 15 kHz with 2 dB soft boost at 10 to 12 kHz
    Sensitivity, nominal, ±3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
    Equivalent noise level, A-weighted: Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
    S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): 71 dB
    Total Harmonic Distortion (THD): < 1 % up to 123 dB SPL peak, < 1 % up to 120 dB SPL RMS sine
    Dynamic range: 100 dB
    Max. SPL, peak before clipping: 142 dB
    Output impedance: From MicroDot: 30 to 40 ohm; from DAD6001-BC: 100 ohm
    Cable drive capability: 300m (984 ft) with DAD6001-BC XLR adapter
    Output balance principle: Signal balanced with DAD6001-BC XLR adapter
    Common Mode Rejection Ration (CMRR): > 60 dB at 50 Hz to 15 kHz with DAD6001-BC XLR adapter
    Power supply (for full performance): Min. 5 V to max. 50 V through DPA adapter for wireless systems; 48 V phantom power ± 4 V with DAD6001-BC XLR adapter
    Current consumption: 1.5 mA (microphone); 3.5 mA with DAD6001-BC XLR adapter
    Connector: MicroDot
    Color: Black
    Weight: 10 g (0.35 oz)
    Capsule diameter: 5.4 mm (0.2 inch)
    Cable length: 2 mm (6.6 ft)
    Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin (and pin 2 on DAD6001-BC XLR adapter)
    Operating temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
    Operating relative humidity: Up to 90 %
    802.67лв.

    Related products:

    Blimp
    Цена:463.48лв.
    PRO -750
    Цена:435.00лв.
    Lavalier
    Цена:372.76лв.

    product inquiry